Description
Lancia Flavia alternator
| Model: | Alternator Flavia |
|---|
New alternator suitable for all Lancia Flavia types 1st and 2nd series. Covering: Lancia Berlina & Lancia PF-coupe & Lancia Flavia Sport.
- Output ± min. 36 up to 40 amp/hr at 1800 RPM
- Built-in regulator (inside this alternator)
- Easy to mount, max. 15 minutes
Mounting instructions
- 1 cable to the starter / motor (thick cable)
- 1 cable to the lamp/light onto dashboard (this is the thin-side original cable mounted onto the old regulator, so you just connect the vertical connection lip on the alternator
- 1 cable from the ignition coil (the incoming 12 volts towards the horizontal connection lip on this alternator)
This is the entire job to be done!
More info
Are you interested in this product ?
Press
Classic Tuning in 'Classic & Sports Car Magazine'
"Banish corrosion from your classic's brake cylinders with these high-quality versions. Made from 304-grade stainless steel, the HyeDraCyl cylinders are direct replacements for Dunlop items fitted to many '50s and '60s Jaguars, Lancias and Ferraris. The originals were cast iron with chromed steel pistons, a combination that had the potential to aid rust, leading to leaking seals and possible brake failure. Six bore sizes are available (from 1.5in at £205 each to 2.5in at £237 each), suitable for front and rear assemblies. Bridge pipes (£17.40) and stainless-steel bleed nipples (£6.50) are available. Classic Tuning can offer machined-from-billet stainless-steel brake cylinder assemblies for exotics such as the Iso Rivolta - ring for details."
Contact information
Please do not hesitate to contact us in case of any questions.
Company Address |
Telephone |
|---|---|
| De Bouw 1-A 3991 SX HOUTEN The Netherlands |
+31 6 537 40 600 calling from outside The Netherlands 06 537 40 600 calling from The Netherlands |
Classic Tuning is part of the BuRoPo BV group
Chamber of Commerce Utrecht reg. no.: 30203409
VAT no.: 8142.62.727.B01